罗海霞.电感耦合等离子体发射光谱(ICP-OES)法测定不锈钢中的硅、锰、磷、铬、镍、钼、铜[J].中国无机分析化学,2019,9(2):58-60.
电感耦合等离子体发射光谱(ICP-OES)法测定不锈钢中的硅、锰、磷、铬、镍、钼、铜
Matrix matching and internal standard -ICP-OES were used to determine silicon, manganese, phosphorus, chromium, nickel, molybdenum and copper in stainless steel
投稿时间:2018-10-16  修订日期:2018-12-27
DOI:doi:10.3969/j.issn.2095-1035.2019.02.013
中文关键词:  不锈钢  电感耦合等离子体发射光谱(ICP-OES)  内标物质
英文关键词:stainless steel  Inductively coupled plasma emission spectra (ICP-OES)  Internal standard substance
基金项目:国家重大科学仪器设备开发专项(2016YFF0102500)资助。
  
作者单位
罗海霞 北矿检测技术有限公司金属矿产资源评价与分析检测北京市重点实验室
摘要点击次数: 61
全文下载次数: 4
中文摘要:
      用HCl-HNO3混和酸溶解不锈钢样品,用钇为内标物质,使用标准样品绘制工作曲线,用电感耦合等离子体发射光谱法(ICP-OES)测定。在选定的操作条件下,对不锈钢标准样品按实验方法进行测定,标准样品的测定值与标准值基本吻合。相对标准偏差( n=11) 元素质量分数在0.01--0.10% 范围内,RSD<5%,质量分数大于1%,RSD <1%。用该法同时测定不锈钢中的硅、锰、磷、铬、镍、钼、铜元素的含量,操作简单、快速、灵敏度高,结果令人满意。
英文摘要:
      Dissolving stainless steel samples with HCl-HNO3 mixed with acid, using yttrium as internal standard material, drawing working curves with standard samples, and measuring with icp-oes. Under the selected operating conditions, the stainless steel standard sample was measured according to the experimental method. Relative standard deviation (n = 11) element mass fraction within the range of 0.01 ~ 0.10%, RSD < 5%, mass fraction > 1%, RSD < 1%. The method is simple and rapid, and the precision and accuracy are all in line with the requirements. This method was used to analyze the content of silicon, manganese, phosphorus, chromium, nickel, molybdenum and copper in stainless steel samples with satisfactory results.
查看全文  查看/发表评论  下载PDF阅读器
关闭