本文已被:浏览 154次 下载 2次
投稿时间:2021-09-13 修订日期:2021-11-19
投稿时间:2021-09-13 修订日期:2021-11-19
中文摘要: 摘要:阴极铜的取样和制样过程对检测结果中铁元素含量影响较大,按照标准中规定的抽取铜板的方法能够满足取样精密度的要求。不同的清理表面、钻取方式,钻头材质、制样方法以及除铁步骤等对检测结果中铁元素含量的影响较大,利用扫描电镜和X-射线能谱对样品中铁的污染物进行了研究,得出了影响铁元素含量变化的原因,提出了采用钨钢钻头,严格清洗研磨设备、四步法除铁和调整检测样品的称取量 等方法来降低阴极铜取制样过程中铁污染的具体措施。
中文关键词: 阴极铜 取样 制样 铁污染
Abstract:Abstract: The sampling and preparation process of cathode copper has a great influence on the iron content in the test results, and the method of extracting copper plate as specified in the standard can meet the requirements of sampling precision. Different cleaning surface, drilling method, drill material, preparation method and iron removal steps have a greater impact on the iron content in the test results, using scanning electroscope and X-ray energy spectrum to study the iron pollutants in the sample, to obtain the causes affecting the changes in iron content, put forward ameasures to reduce iron pollution in the copper cathode sampling and preparation process.The measures include using tungsten steel drill bit, strict cleaning grinding equipment, four-step method removal iron and change the weight of test sample,etc.
文章编号: 中图分类号: 文献标志码:
基金项目:十三五国家重点研发计划 项目编号:2016YFF0102500
作者 | 单位 | |
朱明伟 | 北矿检测技术有限公司 | zhumingwei@bgrimm.com |
孙梦荷 | 北矿检测技术有限公司 | zhumingwei@bgrimm.com |
姜莉莉 | 北矿检测技术有限公司 | zhumingwei@bgrimm.com |
刘玮 | 北矿检测技术有限公司 | zhumingwei@bgrimm.com |
姜求韬 | 北矿检测技术有限公司 | zhumingwei@bgrimm.com |
引用文本:
朱明伟,孙梦荷,姜莉莉,刘玮,姜求韬.交货批阴极铜取制样方法对铁含量影响的研究[J].中国无机分析化学,2022,12(2):108-114.
zhumingwei,SUN Menghe,JIANG Lili,LIU Wei,JIANG Qiutao.Study on the influence of consignment copper cathode sampling and preparation method on iron content[J].Chinese Journal of Inorganic Analytical Chemistry,2022,12(2):108-114.
朱明伟,孙梦荷,姜莉莉,刘玮,姜求韬.交货批阴极铜取制样方法对铁含量影响的研究[J].中国无机分析化学,2022,12(2):108-114.
zhumingwei,SUN Menghe,JIANG Lili,LIU Wei,JIANG Qiutao.Study on the influence of consignment copper cathode sampling and preparation method on iron content[J].Chinese Journal of Inorganic Analytical Chemistry,2022,12(2):108-114.