|
Determination of Molybdenum in Uranium-Molybdenum Alloy by EDTA Back Titration |
Received:March 25, 2014 Revised:May 04, 2014 |
View Full Text View/Add Comment Download reader |
DOI:doi:10.3969/j.issn.2095-1035.2014.03.012 |
KeyWord:EDTA; Back titration; Uranium-Molybdenum alloy |
Author | Institution |
WANG Yun |
中国工程物理研究院,四川 绵阳 |
XIAO Jiqun |
中国工程物理研究院,四川 绵阳 |
|
Hits: 1428 |
Download times: 0 |
Abstract: |
A method for the determination of Molybdenum in Uranium-Molybdenum alloy by EDTA back titration EDTA was described. After being digested by aqua regia,uranium was extracted by TBP-hydrogenated kerosene. To reduce Mo6+ to Mo5+,hydroxyl lammonium chloride was added into the residual solution and then the solution was subsequently complexed with an excess amount of EDTA. The excessive EDTA was titrated with zinc standard solution. The amount of molybdenum was calculated according to the above results. The experiment conditions were optimized and satisfactory results were obtained. The result showed that the relative standard deviation (RSD) was 1.4%. |
Close |