|
Determination of Phosphorus in Silver-Copper Alloy by Precipitation Separation-ICP-AES |
Received:June 01, 2016 Revised:October 13, 2016 |
View Full Text View/Add Comment Download reader |
DOI:doi:10.3969/j.issn.2095-1035.2017.01.011 |
KeyWord:analytical chemistry; ICP-AES; silver-copper alloy; phosphorus |
Author | Institution |
LIU Wei |
贵研资源(易门)有限公司 |
LIU Wen |
贵研资源(易门)有限公司 |
XU Guang |
贵研资源(易门)有限公司 |
GAN Jianzhuang |
贵研铂业股份有限公司,稀贵金属综合利用新技术国家重点实验室项目,昆明 |
LIN Bo |
贵研资源(易门)有限公司 |
MA Wangrui |
贵研资源(易门)有限公司 |
YAO Yanbo |
贵研资源(易门)有限公司 |
CHONG Biao |
贵研资源(易门)有限公司 |
|
Hits: 1123 |
Download times: 0 |
Abstract: |
method for the determination of phosphorus in silver-copper alloy by precipitation separation-ICP-AES was established. Analytical conditions, including precipitation separation of silver chloride and copper sulfide, selection of spectral lines and determination conditions of ICP-AES were systematically investigated. The results showed that the concentrations of silver and copper ions were less than 0.1 mg/L and 1 mg/L, respectively. Cu interferencecould be neglected. The detection limit was 0.076mg/L when the instrument power was 1.3 kW and P 213.617 nm was used as the analytical line. The contents of Phosphorus in silver-copper alloy were determinedas0.00092%—0.0032%.The relative standard deviation (RSD,n=7) and the recoverywere 5.3%—1.7% and 94.4%—103%, respectively. The method is simple, rapid, and has been applied to production analysis. |
Close |